Older homes in Lake Wales were built for a different era of electrical demand. The wiring that was standard when those houses went up was sized for a handful of lights, a refrigerator, and maybe a window unit. It was not designed for a modern kitchen, a home office, a central air system, and an EV charger all drawing from the same panel. That gap between what the wiring was built for and what a modern household demands is where most of the calls we get originate. We handle that work throughout Lake Wales and the surrounding area, every day from 6:30 AM to 11:00 PM.
A small city with a housing stock that includes a lot of original construction tends to generate a specific kind of electrical work: panels that are undersized or aging, circuits that were never documented when an addition went up, outlets that were added by whoever owned the place before. Landlords dealing with rental properties between tenants, homeowners who bought an older house and are only now learning what the wiring looks like, businesses running more equipment than the original service was meant to carry. That is the work we do here.
Call (863) 656-3289 to get a price before anything is scheduled.
A house built several decades ago may still have its original wiring throughout. That is not automatically a problem, but it is a fact worth knowing. Knob-and-tube wiring, which shows up in some of the older construction in this area, was not designed for grounded circuits and does not interact well with modern loads or insulation. Aluminum branch circuit wiring, installed during a period when copper was expensive, requires specific remediation at every device connection to reduce the risk of arcing. Neither is a reason to panic, but both are reasons to have the system looked at before adding load or closing up walls.
For residential and commercial electrical work alike, the first step is understanding what is actually in the walls before any new work is planned. An electrical safety inspection documents the panel condition, the wiring type, the grounding and bonding, and the GFCI and AFCI coverage throughout the property. That picture is what lets us scope the work accurately and give you a price that reflects what the job actually involves, not a number that shifts once we open the walls.
The price for electrical work depends on what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry whatever is being added or changed. A single outlet replacement on a functioning circuit is a different job from tracing a fault that has been intermittent for months. A panel upgrade where the service entrance is already in good shape is a different job from one where the wiring from the meter to the box needs attention as well.
Distance from the panel to the work location matters too. Running a dedicated circuit to a detached building or to the far end of a house involves more wire, more time, and sometimes decisions about how to route through finished walls or attic space. None of that is a reason to delay calling, because those are exactly the questions we work through on the call before anything is scheduled.
You get the rate on the phone. Describe what you are seeing, what type of property it is, and roughly how old the home or building is. For panel work, knowing whether it is a 100-amp or 200-amp service gives us a starting point. We ask a few questions and give you a price before anything is scheduled. The price is confirmed once the scope is clear, and you know what it covers before we start.
The gap between tenants is the best time to do electrical work that would otherwise mean disrupting someone's daily routine. When a unit is empty, we can open walls, pull wire through ceilings, and work through the panel without coordinating around a family's schedule or a tenant's work hours. That is when a landlord can address the knob-and-tube in the back bedroom, add the GFCI protection the kitchen was missing, or upgrade the panel to something that will not trip every time the new tenant runs the microwave and the air conditioning at the same time.
Access is straightforward when nobody lives there. We confirm the scope on the call, agree on the price, and schedule the work for when the unit is available. If the property manager or landlord wants to be on site, we coordinate around that. If they would rather hand off a key and check back when it is done, that works too. The job gets done to code, and the unit is ready for the next tenant without an outstanding electrical issue hanging over the lease.
Older properties often have devices, fixtures, and panel hardware that have been out of regular production for years. A replacement breaker for a panel that has not been manufactured in two decades may need to come from a specialty supplier. A switch or outlet that matches the existing style in a renovated historic property may require a specific order. These are not problems, but they are factors that affect the timeline.
We identify what is needed during the diagnostic visit and let you know on the same call whether the part is something we can source quickly or whether it needs to be ordered. We do not fit a substitute that is close enough when the right part is the right answer.
Some repairs are completed in a single visit. Others involve a return trip once a part arrives. If the work is urgent and a temporary measure can make the situation safe in the meantime, we explain that option and what it covers. We will not leave a hazardous condition unaddressed while waiting on a part. The wiring done properly, start to finish, is the standard every job here is held to. If the scope is still open, the full electrical services list is the place to start.
We take calls every day from 6:30 AM to 11:00 PM, and that range covers most of what people need without having to take time off work to be home. For a problem that will not keep, call and describe what you are seeing. We work through the scope on the call and confirm what is available. A problem that is actively getting worse gets treated as the priority it is.
For businesses that have to stay open and tenants who cannot simply leave for the day, we work around the schedule rather than asking the occupant to work around ours. That might mean starting in a part of the building that is not in use, completing panel work during off-hours, or sequencing the job so that the disruption to any one area is as short as possible. We confirm the plan on the call before anything is scheduled.
A refrigerator, a dryer, a dishwasher, a chest freezer, or a microwave that keeps tripping the breaker is usually on a circuit it was never meant to share. Dedicated circuits put one load on one breaker with no competition. That is a straightforward run from the panel to the appliance location, but it requires panel capacity. If the panel is already close to full, we scope the circuit addition and the panel upgrade together so you have the full picture before anything starts.
Kitchens, bathrooms, garages, and outdoor outlets require ground-fault protection. Bedrooms and living areas require arc-fault protection in current construction, and older homes that have not been updated often lack both. GFCI outlets and breakers interrupt the circuit when they detect a leakage current that could cause a shock. AFCI breakers detect the kind of arcing that can start a fire inside a wall before anything visible happens. Installing them in an older home is one of the most practical safety improvements available.
A panel-mounted surge device catches large voltage spikes at the service entrance before they reach outlets, appliances, and electronics. In a region where lightning frequency is among the highest in the country and where summer storms can arrive without much warning, that protection is a practical addition to any panel, new or existing. It does not replace point-of-use strips for sensitive equipment, but it handles the transient events a strip cannot absorb.
A full rewire replaces every circuit from the panel out. A partial rewire targets the rooms or circuits where the wiring has deteriorated, where knob-and-tube is still in place, or where a renovation has opened enough of the walls to make a complete update practical. Aluminum wiring remediation addresses the connection points at every device rather than replacing every run of wire in the house. The right scope depends on what the inspection finds and what the property needs. Electrical work here is done to the code this area actually enforces, and that is what determines what the job has to include.
We cover Lake Wales and the communities around it. If you are in Highland Park, Waverly, Crooked Lake Park, Dundee, or Alturas, we take calls from your area. The same goes for the broader Polk County area. Whether it is a repair at a rental property or a panel upgrade at a home that has not had electrical work done in years, the process is the same from the first call through the finished job.
Yes. We can confirm what was done and what was found. If you need that information sent to a specific contact, let us know when you call and we will work out the details.
Yes.
A tenant can call (863) 656-3289 and describe what they are seeing.
If the landlord needs to be the one who authorizes and receives the quote, let us know on the call and we will handle the communication accordingly.
A pre-purchase inspection looks at the panel condition and capacity, the wiring type throughout the house, the grounding and bonding, and the GFCI and AFCI coverage in kitchens, bathrooms, garages, and bedrooms. It also identifies any visible wiring concerns or code violations that would need to be addressed. The goal is to give you a clear picture of what the electrical system looks like and what it would cost to bring it up to current standards, so you can factor that into the purchase decision.
Yes.
Call (863) 656-3289 and describe the situation.
We will tell you what we think is going on and what the options are. You decide whether to move forward once you have the picture and the price.
Yes. We assess what was done, identify what needs to be corrected, and bring the work into compliance. Whether a permit is needed for the remediation depends on the scope and what the local requirements are at your address. We confirm what applies before the work starts.
If the same fault returns after work we did, call us and describe what you are seeing. We will work through the issue with you. What is and is not covered depends on the specifics of the original job, and that conversation happens on the phone.
Older properties in this area tend to need panel upgrades, GFCI and AFCI protection added to circuits that predate those requirements, and dedicated circuits for appliances that are currently sharing a breaker with other loads. Knob-and-tube and aluminum wiring also show up in some of the older construction here, and both require specific handling rather than a standard repair approach. An electrical safety inspection is usually the starting point when a new owner is not sure what the property has.
Call (863) 656-3289 and describe what you are dealing with.
We will ask about the property, the symptom, and the panel. By the end of that call, you will have a price, a scope, and a clear sense of what the visit will cover. We take calls every day from 6:30 AM to 11:00 PM, and the price is settled before anything is scheduled.
One call. One electrician. One price, agreed first.
Other towns where we take electrical work: Dundee, Cypress Gardens, Wahneta.
You can browse our coverage map.
From a tripped breaker to a full panel upgrade, we handle the electrical work that keeps homes and businesses in Lake Wales running safely. Below is a plain-language look at what each service covers, who it fits best, and what is worth knowing before you call. If you already know what you need, call us for a quote and we will confirm the price before anything is scheduled.
| Service | What It Covers | Common Situations | Things to Know |
|---|---|---|---|
| Electrical Panel and Service Upgrades | Load calculation, Panel replacement or upgrade to 200-amp service, Grounding and bonding, Subpanel installation for additions or detached buildings | Older homes with 100-amp service or a fuse box, and any property adding significant new load | A permit is typically required for a service upgrade. We confirm what applies at your address before the work starts and the panel is opened. |
| Electrical Safety Inspections | Panel and wiring evaluation, Device and outlet condition check, Code violation identification and repair | Buyers before closing, landlords before a new tenancy, and owners of homes with older or unidentified wiring | An inspection gives you a clear picture of what the panel, wiring, and devices actually look like before you commit to a property or schedule a tenant. |
| Ceiling Fan Installation | New fan installation with wiring, Fan replacement, Box upgrade where the existing box is not fan-rated | Any room adding a fan for the first time, or replacing a fan where the box is not rated for the load | A standard light fixture box is not rated to hold a ceiling fan. We check and upgrade the box if needed before the fan goes up. |
Call (863) 656-3289 to describe what you are dealing with and get a straight answer on what the job involves and what it costs, before anything is scheduled.
(863) 656-3289